ISARD Encapsulation Film Series
ISARD 2280 EVA film
ISARD 2280 encapsulation film is produced by mixing ethylene-vinyl acetate copolymer resin (EVA) with various necessary additives. In a solar PV module, its purpose is to bind the glass and backsheet durably, and protect and fix solar cells. It has excellent electric insulation and strong resistance to dampness, heat and ultraviolet ageing. Its stable resistance to PID ensures that the module will work efficiently and durably outdoors.
NO.PerformanceTest ItemStandard ValueUnit  ISARD 2280
1Physical PropertiesThicknessGB/T 6672-2001mm0.4~0.8

DensityASTM D792g/cm30.96

Tensile strength  (After lamination)GB/T 13022-91Mpa≥16

Ultimate Elongation (After lamination )%≥450

Peel Strength with GlassASTM D903N/cm≥70

Peel Strength with Back SheetN/cm≥40
2Thermal PropertiesMD/TD shrinkageASTM 1204MD%/TD%≤4/≤2
3
Gel contentASTM D2765≥75%
4Electrical PropertiesVolume resistivityGB 1410-89Ω .cm≥1.0×1015
5
Light transmission
after lamination   (280- 380nm)
GB/T 2410-
2008
N/cm≤20
6optical   propertiesLight transmission
after lamination
(380nm~1100nm)
GB/T 2410-
2008
N/cm≥91
UV aging Yellowness Index(60kWh/m2 )GB/T 29848ΔYI≤5
7DurabilityHeat/Humidity85℃/85 aging 1000hGB/T 29848ΔYI≤5

1.Can effectively prevent the risk of PID components.

2.Superior weather resistance (including high temperature, high humidity, UV, etc.) 

3.Excellent adhesion retention after aging

4.The best light transmittance, to ensure the efficiency of power generation components 

5.Lower shrinkage, to ensure the quality of laminated stability

1.Tube diameter: 76mm

2.Outer packing for special pressure-resistant carton, transport at the bottom of the tray and stretched with a fixed film, 1 roll / box.


Copyright©2018-2023 Crown Advanced Material Co., Ltd., all rights reserved Shanghai ICP No. 19026278-1