ISARD Encapsulation Film Series
ISARD 3180 second-gen PO encapsulation film
ISARD 3180 polyolefin elastic encapsulation film is a cross-linked composite polyolefin PV encapsulating material that is produced by mixing polyolefin copolymer resin with various necessary additives in certain mixing ratio. It is characterized by excellent moisture insulation, the ability to firmly bind the glass and backsheet durably, the ability to protect and fix solar cells, excellent resistance to dampness, heat and ultraviolet ageing, and long stable resistance to PID.
NO.PerformanceTest ItemStandard ValueUnit  ISARD 3180
1Physical PropertiesThicknessGB/T 6672-2001mm0.4~0.8
Tensile strength  (After lamination)GB/T 13022-91Mpa≥8
Ultimate Elongation (After lamination )%≥400
Peel Strength with GlassASTM D903N/cm≥70
Peel Strength with Back SheetN/cm≥40
2Thermal PropertiesMD/TD shrinkageASTM 1204MD%/TD%≤4/≤2
3
Gel contentASTM D2765≥70%
4Electrical PropertiesVolume resistivityGB 1410-89Ω .cm≥1.0×1015
5
Light transmission
after lamination   (280- 380nm)
GB/T 2410-
2008
%≤20
6optical   propertiesLight transmission
after lamination
(380nm~1100nm)
GB/T 2410-
2008
%≥90
UV aging Yellowness Index(60kWh/m2 )GB/T 29848ΔYI≤5
7DurabilityHeat/Humidity85℃/85 aging 1000hGB/T 29848ΔYI≤5

1.Can effectively prevent the risk of PID components.

2.Superior weather resistance (including high temperature, high humidity, UV, etc.) 

3.Excellent adhesion retention after aging

4.The best light transmittance, to ensure the efficiency of power generation components 

5.Lower shrinkage, to ensure the quality of laminated stability

1.Tube diameter: 76mm

2.Outer packing for special pressure-resistant carton, transport at the bottom of the tray and stretched with a fixed film, 1 roll / box.

Copyright©2018-2023 Crown Advanced Material Co., Ltd., all rights reserved Shanghai ICP No. 19026278-1